Bitmain Antminer L3+ unboxing , mine LTC & scrypt cryptocurrency-ASIC hardware Litecoin mining rig


hello Internet so today after a few
months we received the antminer l3+ from bitmain, it took quite a few months from
production to shipping to get over here and today we’re gonna review on doing
the unboxing of the ASIC miner packages so you know what comes from the factory in China this is one of the or it is one of the
most powerful ASIC miners for the scrypt algorithm including litecoin (LTC) and
any other coins the support they are supported by the scrypt algorithm
currently in litecoin mining at 504 MHs so let’s proceed with the unboxing of this unit
and see what comes inside the package from the factory China it took actually
almost three months since we ordered for now so when you open the box it comes
from the factory with what looks to be a thank you better thank you for buying
the a minor of three and comes to the description that there are minor comes
with four Hoshi pours a niche borer is powered by two PCIe slots the control
board uses one PCIe slot you need to make sure that each one of the
hashtagwars the has two PCIe connectors is connected
to only one power supply the total consumption for this machine is a
hundred watts on each one of the hashboards have a 90 watts each please started attaching balls over here
it has four of them you will have to connect PCIe connectors to each and
here you have the control unit or you will have to put an additional PCIe
connector it has advanced on both sides of the unit as an our connection to
lights to indicate the operation of the units the reset button this minor will
produce a lot of heat and a lot of noise so you need to make sure to place it on
the location of where you have all the necessary conditions so you’ll need
air conditioning and you need to have stable power and enable traction to be
able to connect a minor when you connect this minor to the to the network is when
I get on others from the DHCP server and basically you will have to configure it
using a web interface that comes with these miners so let’s move it to the
location that we’re going to be using this unit connected check the video
maker on the description where I show you how to wire up to HP server power
supply units to use it to power up these PCIe connectors if not you can use one
power supply that has at least one 1000 Watts and I’m gonna link on the
description other power supply units that you may use to power it you see on
it thank you so much for watching I will
love to see you again

Add a Comment

Your email address will not be published. Required fields are marked *